Port Configuration Enterprise Manager
Introduction
This document describes the ports used for Enterprise Manager for SCCM.
Abbreviations used within this document:
- EM = Matrix42 Enterprise Manager for SCCM
- EM-DP = EM Distribution Point
Port configuration
Within an EM infrastructure various services are available that must be responsive to be able to operate the system. To ensure this responsiveness, the ports for each component must be configured correctly. This applies for the local Windows firewall as well as the enterprise firewall.
The following table provides information on the port configuration.
Client to SCCM-DP | Description | Access to mass data/installation data |
Configuration | ||
Protocol | SMB/CIFS | |
Port | SMB/CIFS |
Client to EM Server | Description | The port where the EM server listens to client requests. |
Configuration | Administration -> Other -> Server -> Agent port and when agent is installed via the "HTTP MSI parameter |
|
Protocol | TCP | |
EM | Port |
WebAPI: 9010, HTTPS (v7.3): 9016 |
EMv6 (Not supported) | Port | WCF: 9001 |
Server/Client to EM-DP | Description | The port where the EM-DP listens to client requests. |
Configuration | Administration -> SCCM -> Distribution Point -> Edit the respective DP | |
Protocol | TCP | |
EM | Port | WebAPI: 9011, HTTPS (v7.3): 9012 |
EMv6 (Not supported) | Port | WCF: 9003 |
Website | Description | The port where the web console is running |
Configuration | Administration -> Other -> Servers -> Web Server | |
Protocol | HTTP | |
Port | 8098 |
EM-Server to Client | Description | The port where the EM Agent listens to push tasks and log file requests. |
Configuration | Settings.xml in the „Settings“ sub directory of the EM Agent and EM Agent profile settings |
|
Protocol | TCP | |
EM | Port | WebAPI: 9010 |
EMv6 (Not supported) | Port | WCF: 9001 |
EM-DP to EM-Server | Description | Is used for access to log files. |
Configuration | Administration -> Other -> Server -> Download Port | |
Protocol | TCP | |
EM | Port | WebAPI: 9010, HTTPS (v7.3): 9016 |
EMv6 (Not supported) | Port | WCF: 9002 |
Import service to EM Server | Description | Is used for access to log files. |
Configuration | Administration -> Other -> Server -> Import Port | |
Protocol | TCP | |
Port |
9004 |
- Communications from EM-Server(v19): EM-Agent(v6.4.2 & v19), EM-DP(v6.4.2 & v19)
- Communications from EM-DP(v19): EM-Agent(v6.4.2 & v19), EM-Server(v6.4.2 & v19)
- Communications from EM-Agent(v19): EM-Server(v19), EM-DP(v19)
- from v.19 EM-Server and EM-DP must have the same version!
- The local v19Agent communication between service and GUI runs over SignalR with port 4242 and 9013