Windows 10/11 Guide IV: Create a Tag and assign it
Create a Tag
Please refer to our Management Guide Part III: Tags for further information. In this Guide we will create a random Tag and assign it to your first device.
- Open your Silverback Management Console (e.g https://silverback.imagoverum.com/admin)
- Login as an Administrator
- Navigate to Tags
- Click New Tag
- Enter a friendly name (required)
- Enter a description (optional)
- In the Enabled Features Area
- Enable Profile
- In the Device Types Area (required)
- Enable Windows
- Click Save
Configure Exchange Active Sync
- On the left tab bar navigate to Profile
- Select the profile type Exchange ActiveSync
- Create New Profile
- Enter as Label Name e.g. Office365
- Enter as Server Name e.g. outlook.office365.com
- Click Save
- If you want to edit Profile, click edit
- If you want to remove Profile, click removed
- If you want to enable or disable Profile, use the checkbox
By adding or editing a Exchange Profile Active Sync Profile, the tag will be automatically be saved. So please be careful when editing EAS Profiles.
- For additional configuration please refer to our full document Exchange Active Sync
Assign the Tag
- Navigate to Definition
- Enable Auto Population
With this setting our new Tag will apply by default to all Windows 10/11 devices.
- For additional configuration please refer to our full document Auto Population
- Click Save & Close
- Confirm with OK
Next Steps
- Proceed with next chapter: Windows 10/11 Guide IV: Deploy Apps
- Collect additional information about Tags in our Management Guide Part III: Tags