Skip to main content
Matrix42 Self-Service Help Center

Install EgoSecure Changes Listener or Service Bus Adapter (Legacy)

Service Bus is responsible for the two-way communication between the EgoSecure Server (used for the desktop version of Console - the EgoSecure Data Protection Console) and the UUX platform (used for the browser version of the Console – the EgoSecure Data Protection UUX Console). First, configure Service Bus on the EgoSecure Server side and then install and configure Matrix42 Enterprise Service Bus on the EgoSecure Data Protection UUX Console side (see NEXT STEPS).

For details about installing Service Bus Adapter for 21.0.2 versions and higher, see Service Bus V: Install EgoSecure Adapter.

Installing Service BUS Adapter (21.0.1 Versions only)

Describes the installation of Service Bus Adapter as a separate application on the EgoSecure Server side. Available only in the version 21.0.1.

Remove EgoSecure Changes Listener before installing EgoSecure Service Bus Adapter.

  1. Download EgoSecure Service Bus Adapter from the Endpoint Security page (under Connectivity Tools).
  2. Start the EgoSecureServiceBusAdapterSetup21.0.1.exe file and click Next in the welcome step.
  3. Select the installation directory and then click Next.
  4. On the ServiceBus connection step, select which Service Bus system you use: RabbitMq or Azure.
  5. Fill in the Connection string, Topic name and Pipeline name fields with the data from the Service Bus system you already installed.
  6. Click Next.
  7. On the EgoSecure Server connection step, define login data for the EgoSecure Server.
  8. In the Certificate file field, click Browse to select the Console Authentication certificate previously exported from the EgoSecure Data Protection Console:
    a. In the EgoSecure Data Protection Console, go to Administration » Administrator » SSL configuration.
    b. Select EgoSecure Console Authentication from the list.
    c. Click Export on the toolbar.
    d. Enter and confirm a password for the certificate.
    e. Click OK
  9. In the Certificate password field, enter the password specified during a certificate export. 
  10. Click Next.
  11. Click Install.

Installing Changes Listener (21.0.0 versions and older)

The procedure of configuring the environment for 21.0.0 with Service Bus Adapter includes the installation of Changes Listener and the enabling of Service Bus in AdminTool.

Installing Changes Listener

  1. Download EgoSecure Changes Listener from the Endpoint Security page (under Connectivity Tools).
  2. Start the ChangesListenerSetup.exe file.
  3. Select the installation directory.
  4. Fill in the Connection string, Topic name and Pipeline name fields with the data from the Service Bus system you already installed.

Enabling Service Bus in AdminTool

  1. Launch the AdminTool.exe application.
    It is located on the computer with the installed EgoSecure Server under Start > EgoSecure product group.
  2. Set the Enable Service Bus check box.
  3. Near Service Bus system, select which system you use.
  4. Fill in the Connection string, Topic name and Pipeline name fields with the same data provided during the Changes Listener installation.
  5. Click Save.
    => If you have already setup other components, the synchronization starts. If not, use the Resynchronize button when all components are set up.

SB - adminTool.png

  • Was this article helpful?